3KW Hochpräzises DC-Netzteil für Rackmontage
$7503-2 Piece/Pieces
$875≥3Piece/Pieces
Minimum der Bestellmenge: | 3 Piece/Pieces |
Transport: | Ocean,Land,Air,Express |
Hafen: | SHANGHAI,NANJING,QINGDAO |
$7503-2 Piece/Pieces
$875≥3Piece/Pieces
Minimum der Bestellmenge: | 3 Piece/Pieces |
Transport: | Ocean,Land,Air,Express |
Hafen: | SHANGHAI,NANJING,QINGDAO |
Modell: SMP4000
Marke: IDEALTEKNIC
Herkunftsort: China
Ausgangsleistung: > 500W
Ausgabetyp: Single
Input Frequency: 50/60hz
Input Voltage: Single-Phase 220vac
Power Factor: 0.85
Power Supply Type: Mosfet-Based
Working Principle: Pwm
Working Mode: Constant Voltage / Constant Current
Control Mode: Knob
Display Mode: Digital Led
Protections: Ocp, Otp
Applications: Lab Test / Led Test / Battery Charging / Aging Test
Certifications: Ce, Rohs
Cooling: Forced Air Cooling
Verkaufseinheiten | : | Piece/Pieces |
Pakettyp | : | Sperrholzkiste |
SMP4000 Serie Benchtop- DC-Netzteil
Überblick
Rack-DC-Netzteile der Serie SMP4000 sind Hochfrequenz-DC-Schaltnetzteile auf Basis von MOSFETs. Im Vergleich zu IGBT-basierten DC-Schaltnetzteilen haben MOSFET-basierte Schaltnetzteile eine höhere Schaltfrequenz, sodass diese Serie von im Rack montierten DC-Netzteilen für geringe Welligkeit, hohe Präzision und schnelle Reaktionseigenschaften bei kleinerem Gehäuse durch Verwendung von kleinere Halbleiterbauelemente und LC-Filtereinheiten. Dadurch hat diese Serie von DC-Netzteilen für die Rackmontage eine höhere Leistungsdichte.
Der Hauptzweck des Designs der DC-Netzteile der SMP4000-Serie besteht darin, kleine Testsysteme zu unterstützen, die Miniaturisierung, hohe Leistungsdichte und die Eignung für die Anforderungen an ein Rack montierte DC-Netzteile erfordern. Das Netzteil verwendet einen 19-Zoll-Standardschrank in einem Rack, verwendet einen einphasigen 220-VAC-Eingang mit einer ausgelegten Ausgangsleistung von 3 kW, einem Ausgangsspannungsbereich von 6 VDC bis 700 VDC, der hauptsächlich für LED-Tests, kleine Galvanik, neue Materialerwärmung und elektrische Komponentenprüfung verwendet wird und andere Anwendungen.
Diese Serie von DC-Netzteilen kann RS485, 0-10 V analoge Mengen oder 24 V Interlock Loop hinzufügen, um die Steuerung und Überwachung der Systemintegration zu realisieren.
Eigenschaften
l max. Ausgangsleistung erreicht 3000W.
l CV / CC-Arbeitsmodi, automatisch zwischen zwei Modi umschaltbar.
l Spannung & Strom stufenlos einstellbar, 10-Gang-Potentiometereinstellung.
l LED-Anzeige für Ausgangsspannung und Strom.
l Intelligente Lüfterkühlung, hält kontinuierlichem Arbeiten stand.
l Anpassungsfähigkeit an kontinuierliche oder dynamische Belastungen.
l Automatische Abschaltung bei Überhitzung.
l 434 * 1 00 * 400 tragbares Gehäuse.
l Geringe Welligkeit und Rauschen.
Anwendungen
l Produkte Burn-In-Test, wie DC-Motoren, DC-Lüfter, Fahrzeug-DVD, Fahrzeug-AUDIO, Widerstände und Kondensatoren usw.
l LED-, Motoren- und DC-Lüftertest.
l Akku laden.
l Labore und Universitäten.
l Kleine Elektrolyse- oder Galvanikanlage.
l Andere Bedingungen erfordern eine stabile DC-Ausgabe.
Anleitung für Vorder- und Rückseite
Input |
Voltage |
Single – phase 220V±10% |
|
Frequency |
50Hz/60Hz |
||
Output |
Rated power |
* kW |
|
Output voltage |
Adjusting range |
0V ~ ***V |
|
Line regulation |
<0.05%±20mV (Stability @ ±10% Δ UIN) |
||
Load regulation |
<0.08%±20mV (Stability @ 10% ~ 90% load variance) |
||
Ripple |
500mV (RMS) |
||
Response time |
<5mS (Regulation rate @ 10% ~ 100% load variance) |
||
Output current |
Adjusting range |
0A ~ ***A |
|
Line regulation |
<0.2% (Stability @ ±10% Δ UIN) |
||
Load regulation |
<0.08% (Stability @ 0 ~ 100% Δ UOUT) |
||
Ripple |
500mA (RMS) |
||
Setting & Display |
Control mode |
Front panel button control |
|
Display mode |
LED digital display |
||
Protection & Monitoring functions |
Output over current protection (OCP) |
Power supply automatically CC working and alarms when the output has over current. |
|
Over temperature protection (OTP) |
Power supply automatically cuts off output and alarms when the internal temperature of the power supply exceeds 85 °C. |
||
Noise |
≤55dB |
||
Protection degree |
IP20 |
||
Cooling method |
Forced air cooling |
||
Working conditions |
Ambient temperature |
0℃~45℃ |
|
Humidity |
10%~90%(non-condensing) |
||
Height |
≤2000m |
||
Size (W*H*D) (mm) |
434*110*400 (handle excluded) |
||
Weight |
Approx. 15Kg |
Model |
Output |
Dimension (W*H*D) (mm) |
Packing |
|
SMP406A |
6.0V |
60.0A |
434*110*400 |
Plywood case |
SMP406B |
80.0A |
434*110*400 |
Plywood case |
|
SMP406C |
100.0A |
434*110*400 |
Plywood case |
|
SMP418A |
18.0V |
60.0A |
434*110*400 |
Plywood case |
SMP418B |
80.0A |
434*110*400 |
Plywood case |
|
SMP418C |
100.0A |
434*110*400 |
Plywood case |
|
SMP430A |
30.0V |
60.0A |
434*110*400 |
Plywood case |
SMP430B |
70.0A |
434*110*400 |
Plywood case |
|
SMP430C |
80.0A |
434*110*400 |
Plywood case |
|
SMP430D |
90.0A |
434*110*400 |
Plywood case |
|
SMP436A |
36.0V |
60.0A |
434*110*400 |
Plywood case |
SMP436B |
70.0A |
434*110*400 |
Plywood case |
|
SMP436C |
80.0A |
434*110*400 |
Plywood case |
|
SMP450A |
50.0V |
50.0A |
434*110*400 |
Plywood case |
SMP450B |
60.0A |
434*110*400 |
Plywood case |
|
SMP460A |
60.0V |
50.0A |
434*110*400 |
Plywood case |
SMP4100A |
100.0V |
15.0A |
434*110*400 |
Plywood case |
SMP4100B |
20.0A |
434*110*400 |
Plywood case |
|
SMP4200A |
200.0V |
8.0A |
434*110*400 |
Plywood case |
SMP4200B |
10.0A |
434*110*400 |
Plywood case |
|
SMP4250A |
250.0V |
5.0A |
434*110*400 |
Plywood case |
SMP4250B |
6.0A |
434*110*400 |
Plywood case |
|
SMP4250C |
8.0A |
434*110*400 |
Plywood case |
|
SMP4300A |
300.0V |
6.0A |
434*110*400 |
Plywood case |
SMP4300B |
8.0A |
434*110*400 |
Plywood case |
|
SMP4400A |
400.0V |
5.0A |
434*110*400 |
Plywood case |
SMP4400B |
6.0A |
434*110*400 |
Plywood case |
|
SMP4500A |
500.0V |
4.0A |
434*110*400 |
Plywood case |
SMP4500B |
5.0A |
434*110*400 |
Plywood case |
|
SMP4600A |
600.0V |
3.0A |
434*110*400 |
Plywood case |
SMP4600B |
4.0A |
434*110*400 |
Plywood case |
|
SMP37001 |
700.0V |
3.0A |
434*110*400 |
Plywood case |
More models are
coming soon. l Analog Steuerport über externes 0 ~ 5V / 0 ~ 10 V oder 4 mA ~ 20 mA Signal.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
|