Präzisionsvariables MOSFET-basiertes Switch-Rack-DC-Netzteil
Holen Sie sich aktuelle PreisZahlungsart: | T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Minimum der Bestellmenge: | 3 Piece/Pieces |
Transport: | Ocean,Land,Air |
Hafen: | SHANGHAI,NANJING,QINGDAO |
Zahlungsart: | T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Minimum der Bestellmenge: | 3 Piece/Pieces |
Transport: | Ocean,Land,Air |
Hafen: | SHANGHAI,NANJING,QINGDAO |
Modell: SMP5000
Marke: IDEALTEKNIC
Herkunftsort: China
Ausgangsleistung: > 500W
Ausgabetyp: Single
Die Ausgangsspannung: 24V, 36V
Input Voltage: Single-Phase 220vac
Input Frequency: 50/60hz
Power Factor: 0.85
Power Supply Type: Mosfet-Based
Working Principle: Pwm
Working Mode: Constant Voltage / Constant Current
Control Mode: Knob
Display Mode: Digital Led
Protections: Ocp, Otp
Applications: Lab Test / Led Test / Battery Charging / Aging Test
Certifications: Ce, Rohs
Cooling: Forced Air Cooling
Verkaufseinheiten | : | Piece/Pieces |
Pakettyp | : | Sperrholzkiste |
Bildbeispiel | : | |
Herunterladen | : |
Rack-DC-Netzteil der Serie SMP5000
Überblick
Die DC-Netzteile der Serie SMP5000 wurden mit der höchsten Leistung unter den Hochfrequenz-DC-Schaltnetzteilen auf Basis von MOSFETs entwickelt. Bei einem einphasigen 220Vac-Eingang erreicht die ausgelegte Ausgangsleistung 6KW und die Ausgangsspannung reicht von 10Vdc bis 800Vdc mit geringer Welligkeit, hoher Präzision und hoher Effizienz sowie elektronischen Eigenschaften mit hoher Leistungsdichte.
Die Rack-DC-Netzteile der Serie SMP5000 sind einstellbare DC-Schaltnetzteile mit konstanter Spannung und konstantem Strom. Die Ausgangsspannung und der Ausgangsstrom der Netzteile können separat über die Drehregler auf der Frontplatte eingestellt werden. Die unabhängigen LED-Spannungs- und Strommesser können die Ausgangsspannung und den Stromwert separat anzeigen, und RS485, 0-10 V analoge Menge oder 24 V Interlock-Schleife können hinzugefügt werden, um die Steuerung und Überwachung der Systemintegration zu realisieren.
Dank der höheren Schaltfrequenz von MOSFET-basierten Schaltnetzteilen kann die SMP5000-Serie von rackmontierten DC-Netzteilen bei gleicher Leistung durch den Einsatz kleinerer Halbleiterbausteine und LC . in das kleinere 9-Zoll-Standard-Rackmontage-Chassis eingebaut werden Filtereinheiten, die die Netzteile für Rack-montierte DC-Testsysteme, neue Materialerwärmungsalterungssystemanpassungen, Sicherungstestsysteme usw.
Eigenschaften
l max. Ausgangsleistung erreicht 6000W.
l CV / CC Arbeitsmodi, automatisch zwischen zwei Modi umschaltbar.
l Spannung & Strom stufenlos einstellbar, 10-Gang-Potentiometereinstellung.
l LED-Anzeige für Ausgangsspannung und Strom.
l Intelligente Lüfterkühlung, hält kontinuierlichem Arbeiten stand.
l Anpassungsfähigkeit an kontinuierliche oder dynamische Belastungen.
l Überhitzungs- und Überstromschutz.
l 434*185*500 Tischgehäuse.
l Geringe Welligkeit und Rauschen.
Anwendungen
l Produkte Burn-In-Test, wie DC-Motoren, DC-Lüfter, Fahrzeug-DVD, Fahrzeug-AUDIO, Widerstände und Kondensatoren usw.
l LED-, Motoren- und DC-Lüftertest.
l Akku laden.
l Labore und Universitäten.
l Kleine Elektrolyse- oder Galvanikanlage.
l Andere Bedingungen erfordern eine stabile DC-Ausgabe.
Anweisungen für Vorder- und Rückseite
Input |
Voltage |
Single – phase 220V±10% |
|
Frequency |
50Hz/60Hz |
||
Output |
Rated power |
* kW |
|
Output voltage |
Adjusting range |
0V ~ ***V |
|
Line regulation |
<0.05%±20mV (Stability @ ±10% Δ UIN) |
||
Load regulation |
<0.08%±20mV (Stability @ 10% ~ 90% load variance) |
||
Ripple |
500mV (RMS) |
||
Response time |
<5mS (Regulation rate @ 10% ~ 100% load variance) |
||
Output current |
Adjusting range |
0A ~ ***A |
|
Line regulation |
<0.2% (Stability @ ±10% Δ UIN) |
||
Load regulation |
<0.08% (Stability @ 0 ~ 100% Δ UOUT) |
||
Ripple |
500mA (RMS) |
||
Setting & Display |
Control mode |
Front panel button control |
|
Display mode |
LED digital display |
||
Protection & Monitoring functions |
Output over current protection (OCP) |
Power supply automatically CC working and alarms when the output has over current. |
|
Over temperature protection (OTP) |
Power supply automatically cuts off output and alarms when the internal temperature of the power supply exceeds 85 °C. |
||
Noise |
≤55dB |
||
Protection degree |
IP20 |
||
Cooling method |
Forced air cooling |
||
Working conditions |
Ambient temperature |
0℃~45℃ |
|
Humidity |
10%~90%(non-condensing) |
||
Height |
≤2000m |
||
Size (W*H*D) (mm) |
434*180*500 (handle excluded) |
||
Weight |
Approx. 20 ~ 25Kg |
Model |
Output |
Dimension (W*H*D) (mm) |
Packing |
|
SMP506A |
6.0V |
150.0A |
434*180*500 |
Plywood case |
SMP506B |
200.0A |
434*180*500 |
Plywood case |
|
SMP506C |
300.0A |
434*180*500 |
Plywood case |
|
SMP518A |
18.0V |
150.0A |
434*180*500 |
Plywood case |
SMP518B |
200.0A |
434*180*500 |
Plywood case |
|
SMP518C |
300.0A |
434*180*500 |
Plywood case |
|
SMP530A |
30.0V |
150.0A |
434*180*500 |
Plywood case |
SMP530B |
200.0A |
434*180*500 |
Plywood case |
|
SMP536A |
36.0V |
100.0A |
434*180*500 |
Plywood case |
SMP536B |
150.0A |
434*180*500 |
Plywood case |
|
SMP550A |
50.0V |
80.0A |
434*180*500 |
Plywood case |
SMP550B |
100.0A |
434*180*500 |
Plywood case |
|
SMP560A |
60.0V |
80.0A |
434*180*500 |
Plywood case |
SMP560B |
100.0A |
434*180*500 |
Plywood case |
|
SMP580A |
80.0V |
50.0A |
434*180*500 |
Plywood case |
SMP580B |
80.0A |
434*180*500 |
Plywood case |
|
SMP5100A |
100.0V |
30.0A |
434*180*500 |
Plywood case |
SMP5100B |
40.0A |
434*180*500 |
Plywood case |
|
SMP5100C |
25.0A |
434*180*500 |
Plywood case |
|
SMP5120A |
120.0V |
50.0A |
434*180*500 |
Plywood case |
SMP5200A |
200.0V |
20.0A |
434*180*500 |
Plywood case |
SMP5200B |
25.0A |
434*180*500 |
Plywood case |
|
SMP5250A |
250.0V |
10.0A |
434*180*500 |
Plywood case |
SMP5250B |
15.0A |
434*180*500 |
Plywood case |
|
SMP5250C |
20.0A |
434*180*500 |
Plywood case |
|
SMP5300A |
300.0V |
10.0A |
434*180*500 |
Plywood case |
SMP5300B |
15.0A |
434*180*500 |
Plywood case |
|
SMP5400A |
400.0V |
10.0A |
434*180*500 |
Plywood case |
SMP5400B |
15.0A |
434*180*500 |
Plywood case |
|
SMP5500A |
500.0V |
8.0A |
434*180*500 |
Plywood case |
SMP5500B |
10.0A |
434*180*500 |
Plywood case |
|
SMP5600A |
600.0V |
5.0A |
434*180*500 |
Plywood case |
SMP5600B |
8.0A |
434*180*500 |
Plywood case |
|
SMP5700A |
700.0V |
5.0A |
434*180*500 |
Plywood case |
SMP5700B |
7.0A |
434*180*500 |
Plywood case |
|
SMP5800A |
800.0V |
4.0A |
434*180*500 |
Plywood case |
SMP5800B |
6.0A |
434*180*500 |
Plywood case |
|
More models are
coming soon. l Analog Steuerport über externes 0 ~ 5V / 0 ~ 10 V oder 4 mA ~ 20 mA Signal.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
|